diff options
Diffstat (limited to 'node_modules/mmmagic/build/Makefile')
| -rw-r--r-- | node_modules/mmmagic/build/Makefile | 347 |
1 files changed, 347 insertions, 0 deletions
diff --git a/node_modules/mmmagic/build/Makefile b/node_modules/mmmagic/build/Makefile new file mode 100644 index 0000000..80ade31 --- /dev/null +++ b/node_modules/mmmagic/build/Makefile @@ -0,0 +1,347 @@ +# We borrow heavily from the kernel build setup, though we are simpler since +# we don't have Kconfig tweaking settings on us. + +# The implicit make rules have it looking for RCS files, among other things. +# We instead explicitly write all the rules we care about. +# It's even quicker (saves ~200ms) to pass -r on the command line. +MAKEFLAGS=-r + +# The source directory tree. +srcdir := .. +abs_srcdir := $(abspath $(srcdir)) + +# The name of the builddir. +builddir_name ?= . + +# The V=1 flag on command line makes us verbosely print command lines. +ifdef V + quiet= +else + quiet=quiet_ +endif + +# Specify BUILDTYPE=Release on the command line for a release build. +BUILDTYPE ?= Release + +# Directory all our build output goes into. +# Note that this must be two directories beneath src/ for unit tests to pass, +# as they reach into the src/ directory for data with relative paths. +builddir ?= $(builddir_name)/$(BUILDTYPE) +abs_builddir := $(abspath $(builddir)) +depsdir := $(builddir)/.deps + +# Object output directory. +obj := $(builddir)/obj +abs_obj := $(abspath $(obj)) + +# We build up a list of every single one of the targets so we can slurp in the +# generated dependency rule Makefiles in one pass. +all_deps := + + + +CC.target ?= $(CC) +CFLAGS.target ?= $(CPPFLAGS) $(CFLAGS) +CXX.target ?= $(CXX) +CXXFLAGS.target ?= $(CPPFLAGS) $(CXXFLAGS) +LINK.target ?= $(LINK) +LDFLAGS.target ?= $(LDFLAGS) +AR.target ?= $(AR) + +# C++ apps need to be linked with g++. +LINK ?= $(CXX.target) + +# TODO(evan): move all cross-compilation logic to gyp-time so we don't need +# to replicate this environment fallback in make as well. +CC.host ?= gcc +CFLAGS.host ?= $(CPPFLAGS_host) $(CFLAGS_host) +CXX.host ?= g++ +CXXFLAGS.host ?= $(CPPFLAGS_host) $(CXXFLAGS_host) +LINK.host ?= $(CXX.host) +LDFLAGS.host ?= $(LDFLAGS_host) +AR.host ?= ar + +# Define a dir function that can handle spaces. +# http://www.gnu.org/software/make/manual/make.html#Syntax-of-Functions +# "leading spaces cannot appear in the text of the first argument as written. +# These characters can be put into the argument value by variable substitution." +empty := +space := $(empty) $(empty) + +# http://stackoverflow.com/questions/1189781/using-make-dir-or-notdir-on-a-path-with-spaces +replace_spaces = $(subst $(space),?,$1) +unreplace_spaces = $(subst ?,$(space),$1) +dirx = $(call unreplace_spaces,$(dir $(call replace_spaces,$1))) + +# Flags to make gcc output dependency info. Note that you need to be +# careful here to use the flags that ccache and distcc can understand. +# We write to a dep file on the side first and then rename at the end +# so we can't end up with a broken dep file. +depfile = $(depsdir)/$(call replace_spaces,$@).d +DEPFLAGS = -MMD -MF $(depfile).raw + +# We have to fixup the deps output in a few ways. +# (1) the file output should mention the proper .o file. +# ccache or distcc lose the path to the target, so we convert a rule of +# the form: +# foobar.o: DEP1 DEP2 +# into +# path/to/foobar.o: DEP1 DEP2 +# (2) we want missing files not to cause us to fail to build. +# We want to rewrite +# foobar.o: DEP1 DEP2 \ +# DEP3 +# to +# DEP1: +# DEP2: +# DEP3: +# so if the files are missing, they're just considered phony rules. +# We have to do some pretty insane escaping to get those backslashes +# and dollar signs past make, the shell, and sed at the same time. +# Doesn't work with spaces, but that's fine: .d files have spaces in +# their names replaced with other characters. +define fixup_dep +# The depfile may not exist if the input file didn't have any #includes. +touch $(depfile).raw +# Fixup path as in (1). +sed -e "s|^$(notdir $@)|$@|" $(depfile).raw >> $(depfile) +# Add extra rules as in (2). +# We remove slashes and replace spaces with new lines; +# remove blank lines; +# delete the first line and append a colon to the remaining lines. +sed -e 's|\\||' -e 'y| |\n|' $(depfile).raw |\ + grep -v '^$$' |\ + sed -e 1d -e 's|$$|:|' \ + >> $(depfile) +rm $(depfile).raw +endef + +# Command definitions: +# - cmd_foo is the actual command to run; +# - quiet_cmd_foo is the brief-output summary of the command. + +quiet_cmd_cc = CC($(TOOLSET)) $@ +cmd_cc = $(CC.$(TOOLSET)) -o $@ $< $(GYP_CFLAGS) $(DEPFLAGS) $(CFLAGS.$(TOOLSET)) -c + +quiet_cmd_cxx = CXX($(TOOLSET)) $@ +cmd_cxx = $(CXX.$(TOOLSET)) -o $@ $< $(GYP_CXXFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c + +quiet_cmd_objc = CXX($(TOOLSET)) $@ +cmd_objc = $(CC.$(TOOLSET)) $(GYP_OBJCFLAGS) $(DEPFLAGS) -c -o $@ $< + +quiet_cmd_objcxx = CXX($(TOOLSET)) $@ +cmd_objcxx = $(CXX.$(TOOLSET)) $(GYP_OBJCXXFLAGS) $(DEPFLAGS) -c -o $@ $< + +# Commands for precompiled header files. +quiet_cmd_pch_c = CXX($(TOOLSET)) $@ +cmd_pch_c = $(CC.$(TOOLSET)) $(GYP_PCH_CFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c -o $@ $< +quiet_cmd_pch_cc = CXX($(TOOLSET)) $@ +cmd_pch_cc = $(CC.$(TOOLSET)) $(GYP_PCH_CXXFLAGS) $(DEPFLAGS) $(CXXFLAGS.$(TOOLSET)) -c -o $@ $< +quiet_cmd_pch_m = CXX($(TOOLSET)) $@ +cmd_pch_m = $(CC.$(TOOLSET)) $(GYP_PCH_OBJCFLAGS) $(DEPFLAGS) -c -o $@ $< +quiet_cmd_pch_mm = CXX($(TOOLSET)) $@ +cmd_pch_mm = $(CC.$(TOOLSET)) $(GYP_PCH_OBJCXXFLAGS) $(DEPFLAGS) -c -o $@ $< + +# gyp-mac-tool is written next to the root Makefile by gyp. +# Use $(4) for the command, since $(2) and $(3) are used as flag by do_cmd +# already. +quiet_cmd_mac_tool = MACTOOL $(4) $< +cmd_mac_tool = ./gyp-mac-tool $(4) $< "$@" + +quiet_cmd_mac_package_framework = PACKAGE FRAMEWORK $@ +cmd_mac_package_framework = ./gyp-mac-tool package-framework "$@" $(4) + +quiet_cmd_infoplist = INFOPLIST $@ +cmd_infoplist = $(CC.$(TOOLSET)) -E -P -Wno-trigraphs -x c $(INFOPLIST_DEFINES) "$<" -o "$@" + +quiet_cmd_touch = TOUCH $@ +cmd_touch = touch $@ + +quiet_cmd_copy = COPY $@ +# send stderr to /dev/null to ignore messages when linking directories. +cmd_copy = ln -f "$<" "$@" 2>/dev/null || (rm -rf "$@" && cp -af "$<" "$@") + +quiet_cmd_alink = LIBTOOL-STATIC $@ +cmd_alink = rm -f $@ && ./gyp-mac-tool filter-libtool libtool $(GYP_LIBTOOLFLAGS) -static -o $@ $(filter %.o,$^) + +quiet_cmd_link = LINK($(TOOLSET)) $@ +cmd_link = $(LINK.$(TOOLSET)) $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o "$@" $(LD_INPUTS) $(LIBS) + +quiet_cmd_solink = SOLINK($(TOOLSET)) $@ +cmd_solink = $(LINK.$(TOOLSET)) -shared $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o "$@" $(LD_INPUTS) $(LIBS) + +quiet_cmd_solink_module = SOLINK_MODULE($(TOOLSET)) $@ +cmd_solink_module = $(LINK.$(TOOLSET)) -bundle $(GYP_LDFLAGS) $(LDFLAGS.$(TOOLSET)) -o $@ $(filter-out FORCE_DO_CMD, $^) $(LIBS) + + +# Define an escape_quotes function to escape single quotes. +# This allows us to handle quotes properly as long as we always use +# use single quotes and escape_quotes. +escape_quotes = $(subst ','\'',$(1)) +# This comment is here just to include a ' to unconfuse syntax highlighting. +# Define an escape_vars function to escape '$' variable syntax. +# This allows us to read/write command lines with shell variables (e.g. +# $LD_LIBRARY_PATH), without triggering make substitution. +escape_vars = $(subst $$,$$$$,$(1)) +# Helper that expands to a shell command to echo a string exactly as it is in +# make. This uses printf instead of echo because printf's behaviour with respect +# to escape sequences is more portable than echo's across different shells +# (e.g., dash, bash). +exact_echo = printf '%s\n' '$(call escape_quotes,$(1))' + +# Helper to compare the command we're about to run against the command +# we logged the last time we ran the command. Produces an empty +# string (false) when the commands match. +# Tricky point: Make has no string-equality test function. +# The kernel uses the following, but it seems like it would have false +# positives, where one string reordered its arguments. +# arg_check = $(strip $(filter-out $(cmd_$(1)), $(cmd_$@)) \ +# $(filter-out $(cmd_$@), $(cmd_$(1)))) +# We instead substitute each for the empty string into the other, and +# say they're equal if both substitutions produce the empty string. +# .d files contain ? instead of spaces, take that into account. +command_changed = $(or $(subst $(cmd_$(1)),,$(cmd_$(call replace_spaces,$@))),\ + $(subst $(cmd_$(call replace_spaces,$@)),,$(cmd_$(1)))) + +# Helper that is non-empty when a prerequisite changes. +# Normally make does this implicitly, but we force rules to always run +# so we can check their command lines. +# $? -- new prerequisites +# $| -- order-only dependencies +prereq_changed = $(filter-out FORCE_DO_CMD,$(filter-out $|,$?)) + +# Helper that executes all postbuilds until one fails. +define do_postbuilds + @E=0;\ + for p in $(POSTBUILDS); do\ + eval $$p;\ + E=$$?;\ + if [ $$E -ne 0 ]; then\ + break;\ + fi;\ + done;\ + if [ $$E -ne 0 ]; then\ + rm -rf "$@";\ + exit $$E;\ + fi +endef + +# do_cmd: run a command via the above cmd_foo names, if necessary. +# Should always run for a given target to handle command-line changes. +# Second argument, if non-zero, makes it do asm/C/C++ dependency munging. +# Third argument, if non-zero, makes it do POSTBUILDS processing. +# Note: We intentionally do NOT call dirx for depfile, since it contains ? for +# spaces already and dirx strips the ? characters. +define do_cmd +$(if $(or $(command_changed),$(prereq_changed)), + @$(call exact_echo, $($(quiet)cmd_$(1))) + @mkdir -p "$(call dirx,$@)" "$(dir $(depfile))" + $(if $(findstring flock,$(word 2,$(cmd_$1))), + @$(cmd_$(1)) + @echo " $(quiet_cmd_$(1)): Finished", + @$(cmd_$(1)) + ) + @$(call exact_echo,$(call escape_vars,cmd_$(call replace_spaces,$@) := $(cmd_$(1)))) > $(depfile) + @$(if $(2),$(fixup_dep)) + $(if $(and $(3), $(POSTBUILDS)), + $(call do_postbuilds) + ) +) +endef + +# Declare the "all" target first so it is the default, +# even though we don't have the deps yet. +.PHONY: all +all: + +# make looks for ways to re-generate included makefiles, but in our case, we +# don't have a direct way. Explicitly telling make that it has nothing to do +# for them makes it go faster. +%.d: ; + +# Use FORCE_DO_CMD to force a target to run. Should be coupled with +# do_cmd. +.PHONY: FORCE_DO_CMD +FORCE_DO_CMD: + +TOOLSET := target +# Suffix rules, putting all outputs into $(obj). +$(obj).$(TOOLSET)/%.o: $(srcdir)/%.c FORCE_DO_CMD + @$(call do_cmd,cc,1) +$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cc FORCE_DO_CMD + @$(call do_cmd,cxx,1) +$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cpp FORCE_DO_CMD + @$(call do_cmd,cxx,1) +$(obj).$(TOOLSET)/%.o: $(srcdir)/%.cxx FORCE_DO_CMD + @$(call do_cmd,cxx,1) +$(obj).$(TOOLSET)/%.o: $(srcdir)/%.m FORCE_DO_CMD + @$(call do_cmd,objc,1) +$(obj).$(TOOLSET)/%.o: $(srcdir)/%.mm FORCE_DO_CMD + @$(call do_cmd,objcxx,1) +$(obj).$(TOOLSET)/%.o: $(srcdir)/%.s FORCE_DO_CMD + @$(call do_cmd,cc,1) +$(obj).$(TOOLSET)/%.o: $(srcdir)/%.S FORCE_DO_CMD + @$(call do_cmd,cc,1) + +# Try building from generated source, too. +$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.c FORCE_DO_CMD + @$(call do_cmd,cc,1) +$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cc FORCE_DO_CMD + @$(call do_cmd,cxx,1) +$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cpp FORCE_DO_CMD + @$(call do_cmd,cxx,1) +$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.cxx FORCE_DO_CMD + @$(call do_cmd,cxx,1) +$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.m FORCE_DO_CMD + @$(call do_cmd,objc,1) +$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.mm FORCE_DO_CMD + @$(call do_cmd,objcxx,1) +$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.s FORCE_DO_CMD + @$(call do_cmd,cc,1) +$(obj).$(TOOLSET)/%.o: $(obj).$(TOOLSET)/%.S FORCE_DO_CMD + @$(call do_cmd,cc,1) + +$(obj).$(TOOLSET)/%.o: $(obj)/%.c FORCE_DO_CMD + @$(call do_cmd,cc,1) +$(obj).$(TOOLSET)/%.o: $(obj)/%.cc FORCE_DO_CMD + @$(call do_cmd,cxx,1) +$(obj).$(TOOLSET)/%.o: $(obj)/%.cpp FORCE_DO_CMD + @$(call do_cmd,cxx,1) +$(obj).$(TOOLSET)/%.o: $(obj)/%.cxx FORCE_DO_CMD + @$(call do_cmd,cxx,1) +$(obj).$(TOOLSET)/%.o: $(obj)/%.m FORCE_DO_CMD + @$(call do_cmd,objc,1) +$(obj).$(TOOLSET)/%.o: $(obj)/%.mm FORCE_DO_CMD + @$(call do_cmd,objcxx,1) +$(obj).$(TOOLSET)/%.o: $(obj)/%.s FORCE_DO_CMD + @$(call do_cmd,cc,1) +$(obj).$(TOOLSET)/%.o: $(obj)/%.S FORCE_DO_CMD + @$(call do_cmd,cc,1) + + +ifeq ($(strip $(foreach prefix,$(NO_LOAD),\ + $(findstring $(join ^,$(prefix)),\ + $(join ^,deps/libmagic/libmagic.target.mk)))),) + include deps/libmagic/libmagic.target.mk +endif +ifeq ($(strip $(foreach prefix,$(NO_LOAD),\ + $(findstring $(join ^,$(prefix)),\ + $(join ^,magic.target.mk)))),) + include magic.target.mk +endif + +quiet_cmd_regen_makefile = ACTION Regenerating $@ +cmd_regen_makefile = cd $(srcdir); /usr/local/lib/node_modules/npm/node_modules/node-gyp/gyp/gyp_main.py -fmake --ignore-environment "-Dlibrary=shared_library" "-Dvisibility=default" "-Dnode_root_dir=/Users/minteck/Library/Caches/node-gyp/17.5.0" "-Dnode_gyp_dir=/usr/local/lib/node_modules/npm/node_modules/node-gyp" "-Dnode_lib_file=/Users/minteck/Library/Caches/node-gyp/17.5.0/<(target_arch)/node.lib" "-Dmodule_root_dir=/Users/minteck/Code/ArgonCDN/node_modules/mmmagic" "-Dnode_engine=v8" "--depth=." "-Goutput_dir=." "--generator-output=build" -I/Users/minteck/Code/ArgonCDN/node_modules/mmmagic/build/config.gypi -I/usr/local/lib/node_modules/npm/node_modules/node-gyp/addon.gypi -I/Users/minteck/Library/Caches/node-gyp/17.5.0/include/node/common.gypi "--toplevel-dir=." binding.gyp +Makefile: $(srcdir)/deps/libmagic/libmagic.gyp $(srcdir)/build/config.gypi $(srcdir)/binding.gyp $(srcdir)/../../../../Library/Caches/node-gyp/17.5.0/include/node/common.gypi $(srcdir)/../../../../../../usr/local/lib/node_modules/npm/node_modules/node-gyp/addon.gypi + $(call do_cmd,regen_makefile) + +# "all" is a concatenation of the "all" targets from all the included +# sub-makefiles. This is just here to clarify. +all: + +# Add in dependency-tracking rules. $(all_deps) is the list of every single +# target in our tree. Only consider the ones with .d (dependency) info: +d_files := $(wildcard $(foreach f,$(all_deps),$(depsdir)/$(f).d)) +ifneq ($(d_files),) + include $(d_files) +endif |