diff options
Diffstat (limited to 'school/node_modules/node-forge/setup')
| -rw-r--r-- | school/node_modules/node-forge/setup/configure.ac | 202 | ||||
| -rwxr-xr-x | school/node_modules/node-forge/setup/install-sh | 269 | ||||
| -rw-r--r-- | school/node_modules/node-forge/setup/m4/as-python.m4 | 156 |
3 files changed, 0 insertions, 627 deletions
diff --git a/school/node_modules/node-forge/setup/configure.ac b/school/node_modules/node-forge/setup/configure.ac deleted file mode 100644 index 0d94441..0000000 --- a/school/node_modules/node-forge/setup/configure.ac +++ /dev/null @@ -1,202 +0,0 @@ -# Configure script for Digital Bazaar Bitmunk product line -# Usage: Run ./configure once -# Author: Manu Sporny - -AC_PREREQ([2.60]) -AC_INIT([forge],[0.1.0],[support@digitalbazaar.com]) -AC_CONFIG_AUX_DIR(setup) - -# Setup standard build environment variables -# FIXME: allow changing via configure option -FORGE_DIR=`(cd ${srcdir} && pwd)` -AC_SUBST(FORGE_DIR) -DATE_YMD=`date +%Y%m%d` -PACKAGE_DATE_VERSION=${PACKAGE_VERSION}-${DATE_YMD} -AC_SUBST(DATE_RFC_2822) -AC_SUBST(PACKAGE_DATE_VERSION) - -dnl ----------------- docs ----------------- - -AC_ARG_ENABLE([docs], - AS_HELP_STRING([--enable-docs], [build documentation [no]]), - [ - case "${enableval}" in - yes) BUILD_DOCS=yes ;; - no) BUILD_DOCS=no ;; - *) AC_MSG_ERROR(bad value ${enableval} for --enable-docs) ;; - esac - ], [BUILD_DOCS=no]) dnl Default value - -AC_SUBST(BUILD_DOCS) - -dnl ----------------- tests ----------------- - -AC_ARG_ENABLE([tests], - AC_HELP_STRING([--disable-tests], [disable building test apps [no]]), - [ - case "${enableval}" in - yes) BUILD_TESTS=yes ;; - no) BUILD_TESTS=no ;; - *) AC_MSG_ERROR(bad value ${enableval} for --disable-tests) ;; - esac - ], [BUILD_TESTS=no]) dnl Default value - -AC_SUBST(BUILD_TESTS) - -dnl ----------------- build flash ----------------- - -AC_ARG_ENABLE([flash], - AC_HELP_STRING([--disable-flash], [disable building Flash [no]]), - [ - case "${enableval}" in - yes) BUILD_FLASH=yes ;; - no) BUILD_FLASH=no ;; - *) AC_MSG_ERROR(bad value ${enableval} for --disable-flash) ;; - esac - ], [BUILD_FLASH=yes]) dnl Default value - -AC_ARG_ENABLE([pre-built-flash], - AC_HELP_STRING([--disable-pre-built-flash], - [disable use of pre-built Flash [no]]), - [ - case "${enableval}" in - yes) USE_PRE_BUILT_FLASH=yes ;; - no) USE_PRE_BUILT_FLASH=no ;; - *) AC_MSG_ERROR(bad value ${enableval} for --disable-flash) ;; - esac - ], [USE_PRE_BUILT_FLASH=yes]) dnl Default value - -AC_SUBST(BUILD_FLASH) -AC_SUBST(USE_PRE_BUILT_FLASH) - -dnl ----------------- mxmlc ----------------- - -AC_ARG_WITH([mxmlc], - AC_HELP_STRING([--with-mxmlc=PATH], - [use PATH for mxmlc]), - [ - case "${withval}" in - yes|no) AC_MSG_ERROR(bad value ${withval} for --with-mxmlc) ;; - *) MXMLC="${withval}" ;; - esac - if test "x$MXMLC" = x -o ! -x "$MXMLC"; then - AC_MSG_ERROR([mxmlc not found at "$MXMLC"]) - fi - ]) - -if test "$BUILD_FLASH" = "yes" ; then - dnl Need to try to find mxmlc - if test "x$MXMLC" = x; then - AC_CHECK_PROGS(MXMLC, mxmlc /usr/lib/flex3/bin/mxmlc,, $PATH /) - fi - dnl Check that mxmlc was found - if test "x$MXMLC" = x; then - if test "$USE_PRE_BUILT_FLASH" = "yes"; then - dnl Check pre-built SWF is present - if test -r "$FORGE_DIR/swf/SocketPool.swf"; then - AC_MSG_NOTICE([Using pre-built Flash]) - BUILD_FLASH=no - else - AC_MSG_ERROR([mxmlc and pre-built Flash not found]) - fi - else - AC_MSG_ERROR([mxmlc not found, try --with-mxmlc]) - fi - fi -fi - -AC_SUBST(MXMLC) - -dnl ----------------- mxmlc debug ----------------- - -AC_ARG_ENABLE([mxmlc-debug], - AC_HELP_STRING([--enable-mxmlc-debug], [enable mxmlc debug mode [no]]), - [ - case "${enableval}" in - yes) MXMLC_DEBUG_MODE=yes ;; - no) MXMLC_DEBUG_MODE=no ;; - *) AC_MSG_ERROR(bad value ${enableval} for --enable-mxmlc-debug) ;; - esac - ], [MXMLC_DEBUG_MODE=no]) dnl Default value - -AC_SUBST(MXMLC_DEBUG_MODE) - -dnl ----------------- end of options ----------------- - -echo -e "\n--------- Configuring Build Environment -----------" - -PKG_PROG_PKG_CONFIG - -# Checking for standard build tools -AC_PROG_CPP -AC_PROG_INSTALL -AS_PATH_PYTHON([2.7]) - -if test "x$PYTHON" != x; then - save_CPPFLAGS="$CPPFLAGS" - AC_CHECK_PROGS([PYTHON_CONFIG], [python-config]) - if test "x$PYTHON_CONFIG" != x; then - CPPFLAGS="$CPPFLAGS `$PYTHON_CONFIG --cflags`" - fi - AC_CHECK_HEADERS([Python.h], - [BUILD_PYTHON_MODULES=yes], - [BUILD_PYTHON_MODULES=no - AC_MSG_WARN([Python.h not found, SSL bindings will not be build.])]) - CPPFLAGS="$save_CPPFLAGS" -else - AC_MSG_WARN([Need at least Python 2.7 to build SSL bindings.]) -fi - -AC_SUBST(BUILD_PYTHON_MODULES) - -dnl ---------------------------------- - -dnl NOTE: -dnl This code was used previously to autogenerate the .gitignore file but due -dnl to the current more common use of just the js files, it's likely people -dnl who checkout the code will never run the build scripts. The files are now -dnl just hardcoded into .gitignore and should be updated by hand as needed. -dnl -dnl # Generating files -dnl AC_CONFIG_FILES([ -dnl .gitignore -dnl Makefile -dnl ]) -dnl -dnl # add newlines to internal output file list -dnl CONFIGURE_GENERATED_FILES="`echo $ac_config_files | tr ' ' '\n'`" -dnl AC_SUBST(CONFIGURE_GENERATED_FILES) - -AC_OUTPUT - -# Dump the build configuration - -echo -e "\n--------- Forge Build Environment -----------" -echo "Forge Version : $PACKAGE_NAME $PACKAGE_DATE_VERSION" - -if test "x$BUILD_FLASH" = "xyes" ; then - echo "Adobe Flash : Flash building enabled" - echo "MXMLC : $MXMLC" - echo "MXMLC Debug flags : $MXMLC_DEBUG_MODE" -else - echo "Adobe Flash : using pre-built Flash" -fi - -if test "x$BUILD_PYTHON_MODULES" = "xyes" ; then - echo "Python : $PYTHON (version $PYTHON_VERSION)" -else - echo "Python : development environment not found" -fi - -if test "x$BUILD_DOCS" = "xyes"; then - echo "Documentation : enabled" -else - echo "Documentation : disabled (use --enable-docs to enable)" -fi - -if test "x$BUILD_TESTS" = "xyes"; then - echo "Tests : enabled" -else - echo "Tests : disabled (use --enable-tests to enable)" -fi - diff --git a/school/node_modules/node-forge/setup/install-sh b/school/node_modules/node-forge/setup/install-sh deleted file mode 100755 index d4744f0..0000000 --- a/school/node_modules/node-forge/setup/install-sh +++ /dev/null @@ -1,269 +0,0 @@ -#!/bin/sh -# -# install - install a program, script, or datafile -# -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. It can only install one file at a time, a restriction -# shared with many OS's install programs. - - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit="${DOITPROG-}" - - -# put in absolute paths if you don't have them in your path; or use env. vars. - -mvprog="${MVPROG-mv}" -cpprog="${CPPROG-cp}" -chmodprog="${CHMODPROG-chmod}" -chownprog="${CHOWNPROG-chown}" -chgrpprog="${CHGRPPROG-chgrp}" -stripprog="${STRIPPROG-strip}" -rmprog="${RMPROG-rm}" -mkdirprog="${MKDIRPROG-mkdir}" - -transformbasename="" -transform_arg="" -instcmd="$mvprog" -chmodcmd="$chmodprog 0755" -chowncmd="" -chgrpcmd="" -stripcmd="" -rmcmd="$rmprog -f" -mvcmd="$mvprog" -src="" -dst="" -dir_arg="" - -while [ x"$1" != x ]; do - case $1 in - -c) instcmd="$cpprog" - shift - continue;; - - -d) dir_arg=true - shift - continue;; - - -m) chmodcmd="$chmodprog $2" - shift - shift - continue;; - - -o) chowncmd="$chownprog $2" - shift - shift - continue;; - - -g) chgrpcmd="$chgrpprog $2" - shift - shift - continue;; - - -s) stripcmd="$stripprog" - shift - continue;; - - -t=*) transformarg=`echo $1 | sed 's/-t=//'` - shift - continue;; - - -b=*) transformbasename=`echo $1 | sed 's/-b=//'` - shift - continue;; - - *) if [ x"$src" = x ] - then - src=$1 - else - # this colon is to work around a 386BSD /bin/sh bug - : - dst=$1 - fi - shift - continue;; - esac -done - -if [ x"$src" = x ] -then - echo "install: no input file specified" - exit 1 -else - true -fi - -if [ x"$dir_arg" != x ]; then - dst=$src - src="" - - if [ -d $dst ]; then - instcmd=: - chmodcmd="" - else - instcmd=mkdir - fi -else - -# Waiting for this to be detected by the "$instcmd $src $dsttmp" command -# might cause directories to be created, which would be especially bad -# if $src (and thus $dsttmp) contains '*'. - - if [ -f $src -o -d $src ] - then - true - else - echo "install: $src does not exist" - exit 1 - fi - - if [ x"$dst" = x ] - then - echo "install: no destination specified" - exit 1 - else - true - fi - -# If destination is a directory, append the input filename; if your system -# does not like double slashes in filenames, you may need to add some logic - - if [ -d $dst ] - then - dst="$dst"/`basename $src` - else - true - fi -fi - -## this sed command emulates the dirname command -dstdir=`echo $dst | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'` - -# Make sure that the destination directory exists. -# this part is taken from Noah Friedman's mkinstalldirs script - -# Skip lots of stat calls in the usual case. -if [ ! -d "$dstdir" ]; then -defaultIFS=' -' -IFS="${IFS-${defaultIFS}}" - -oIFS="${IFS}" -# Some sh's can't handle IFS=/ for some reason. -IFS='%' -set - `echo ${dstdir} | sed -e 's@/@%@g' -e 's@^%@/@'` -IFS="${oIFS}" - -pathcomp='' - -while [ $# -ne 0 ] ; do - pathcomp="${pathcomp}${1}" - shift - - if [ ! -d "${pathcomp}" ] ; - then - $mkdirprog "${pathcomp}" - else - true - fi - - pathcomp="${pathcomp}/" -done -fi - -if [ x"$dir_arg" != x ] -then - $doit $instcmd $dst && - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dst; else true ; fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dst; else true ; fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dst; else true ; fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dst; else true ; fi -else - -# If we're going to rename the final executable, determine the name now. - - if [ x"$transformarg" = x ] - then - dstfile=`basename $dst` - else - dstfile=`basename $dst $transformbasename | - sed $transformarg`$transformbasename - fi - -# don't allow the sed command to completely eliminate the filename - - if [ x"$dstfile" = x ] - then - dstfile=`basename $dst` - else - true - fi - -# Make a temp file name in the proper directory. - - dsttmp=$dstdir/#inst.$$# - -# Move or copy the file name to the temp name - - $doit $instcmd $src $dsttmp && - - trap "rm -f ${dsttmp}" 0 && - -# and set any options; do chmod last to preserve setuid bits - -# If any of these fail, we abort the whole thing. If we want to -# ignore errors from any of these, just make sure not to ignore -# errors from the above "$doit $instcmd $src $dsttmp" command. - - if [ x"$chowncmd" != x ]; then $doit $chowncmd $dsttmp; else true;fi && - if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd $dsttmp; else true;fi && - if [ x"$stripcmd" != x ]; then $doit $stripcmd $dsttmp; else true;fi && - if [ x"$chmodcmd" != x ]; then $doit $chmodcmd $dsttmp; else true;fi && - -# Now rename the file to the real destination. - - $doit $rmcmd -f $dstdir/$dstfile && - $doit $mvcmd $dsttmp $dstdir/$dstfile - -fi && - - -exit 0 diff --git a/school/node_modules/node-forge/setup/m4/as-python.m4 b/school/node_modules/node-forge/setup/m4/as-python.m4 deleted file mode 100644 index 84d4e36..0000000 --- a/school/node_modules/node-forge/setup/m4/as-python.m4 +++ /dev/null @@ -1,156 +0,0 @@ -## ------------------------ -## Python file handling -## From Andrew Dalke -## Updated by James Henstridge -## Updated by Andy Wingo to loop through possible pythons -## ------------------------ - -# AS_PATH_PYTHON([MINIMUM-VERSION]) - -# Adds support for distributing Python modules and packages. To -# install modules, copy them to $(pythondir), using the python_PYTHON -# automake variable. To install a package with the same name as the -# automake package, install to $(pkgpythondir), or use the -# pkgpython_PYTHON automake variable. - -# The variables $(pyexecdir) and $(pkgpyexecdir) are provided as -# locations to install python extension modules (shared libraries). -# Another macro is required to find the appropriate flags to compile -# extension modules. - -# If your package is configured with a different prefix to python, -# users will have to add the install directory to the PYTHONPATH -# environment variable, or create a .pth file (see the python -# documentation for details). - -# If the MINIMUM-VERSION argument is passed, AS_PATH_PYTHON will -# cause an error if the version of python installed on the system -# doesn't meet the requirement. MINIMUM-VERSION should consist of -# numbers and dots only. - -# Updated to loop over all possible python binaries by Andy Wingo -# <wingo@pobox.com> -# Updated to only warn and unset PYTHON if no good one is found - -AC_DEFUN([AS_PATH_PYTHON], - [ - dnl Find a version of Python. I could check for python versions 1.4 - dnl or earlier, but the default installation locations changed from - dnl $prefix/lib/site-python in 1.4 to $prefix/lib/python1.5/site-packages - dnl in 1.5, and I don't want to maintain that logic. - - dnl should we do the version check? - PYTHON_CANDIDATES="$PYTHON python python2 \ - python2.7 python2.6 pyton2.5 python2.4 python2.3 \ - python2.2 python2.1 python2.0 \ - python1.6 python1.5" - dnl Declare PYTHON as a special var - AC_ARG_VAR([PYTHON], [path to Python interpreter]) - ifelse([$1],[], - [AC_PATH_PROG(PYTHON, $PYTHON_CANDIDATES)], - [ - AC_MSG_NOTICE(Looking for Python version >= $1) - changequote(<<, >>)dnl - prog=" -import sys, string -minver = '$1' -# split string by '.' and convert to numeric -minver_info = map(string.atoi, string.split(minver, '.')) -# we can now do comparisons on the two lists: -if sys.version_info >= tuple(minver_info): - sys.exit(0) -else: - sys.exit(1)" - changequote([, ])dnl - - python_good=false - for python_candidate in $PYTHON_CANDIDATES; do - unset PYTHON - AC_PATH_PROG(PYTHON, $python_candidate) 1> /dev/null 2> /dev/null - - if test "x$PYTHON" = "x"; then continue; fi - - if $PYTHON -c "$prog" 1>&AC_FD_CC 2>&AC_FD_CC; then - AC_MSG_CHECKING(["$PYTHON":]) - AC_MSG_RESULT([okay]) - python_good=true - break; - else - dnl clear the cache val - unset ac_cv_path_PYTHON - fi - done - ]) - - if test "$python_good" != "true"; then - AC_MSG_WARN([No suitable version of python found]) - PYTHON= - else - - AC_MSG_CHECKING([local Python configuration]) - - dnl Query Python for its version number. Getting [:3] seems to be - dnl the best way to do this; it's what "site.py" does in the standard - dnl library. Need to change quote character because of [:3] - - AC_SUBST(PYTHON_VERSION) - changequote(<<, >>)dnl - PYTHON_VERSION=`$PYTHON -c "import sys; print sys.version[:3]"` - changequote([, ])dnl - - - dnl Use the values of $prefix and $exec_prefix for the corresponding - dnl values of PYTHON_PREFIX and PYTHON_EXEC_PREFIX. These are made - dnl distinct variables so they can be overridden if need be. However, - dnl general consensus is that you shouldn't need this ability. - - AC_SUBST(PYTHON_PREFIX) - PYTHON_PREFIX='${prefix}' - - AC_SUBST(PYTHON_EXEC_PREFIX) - PYTHON_EXEC_PREFIX='${exec_prefix}' - - dnl At times (like when building shared libraries) you may want - dnl to know which OS platform Python thinks this is. - - AC_SUBST(PYTHON_PLATFORM) - PYTHON_PLATFORM=`$PYTHON -c "import sys; print sys.platform"` - - - dnl Set up 4 directories: - - dnl pythondir -- where to install python scripts. This is the - dnl site-packages directory, not the python standard library - dnl directory like in previous automake betas. This behaviour - dnl is more consistent with lispdir.m4 for example. - dnl - dnl Also, if the package prefix isn't the same as python's prefix, - dnl then the old $(pythondir) was pretty useless. - - AC_SUBST(pythondir) - pythondir=$PYTHON_PREFIX"/lib/python"$PYTHON_VERSION/site-packages - - dnl pkgpythondir -- $PACKAGE directory under pythondir. Was - dnl PYTHON_SITE_PACKAGE in previous betas, but this naming is - dnl more consistent with the rest of automake. - dnl Maybe this should be put in python.am? - - AC_SUBST(pkgpythondir) - pkgpythondir=\${pythondir}/$PACKAGE - - dnl pyexecdir -- directory for installing python extension modules - dnl (shared libraries) Was PYTHON_SITE_EXEC in previous betas. - - AC_SUBST(pyexecdir) - pyexecdir=$PYTHON_EXEC_PREFIX"/lib/python"$PYTHON_VERSION/site-packages - - dnl pkgpyexecdir -- $(pyexecdir)/$(PACKAGE) - dnl Maybe this should be put in python.am? - - AC_SUBST(pkgpyexecdir) - pkgpyexecdir=\${pyexecdir}/$PACKAGE - - AC_MSG_RESULT([looks good]) - - fi -]) |